PROTOTYPE RANCANGAN PRINTER 3D DENGAN SMART LCD BERBASIS ARDUINO MEGA 2560 MENGGUNAKAN TEKNOLOGI FUSED FILAMENT FABRICATION
Article Sidebar
Published
Jul 1, 2020
Main Article Content
Abstract
In the development of industrial system 4.0 one of which sustains the development is 3D Printing technology. The purpose of this research is to design a 3D Printer machine with an Arduino MEGA 2560 Microcontroller, RAMPS 1.4 Shield, NEMA 17 stepper motor, DVR8825 motor driver, PLament Filament, E3D v6 HotEnd, Memory Card, Smart LCD. Construction of the framework of the design of the 3D Printing tool by assembling the frame of the 3D printing machine, the 3D Machine Stepper Motor, the XYZ Limit Endstop, the exstruder mount, the bed holder, the HotEnd assembly for the heater heater. The printing process can be connected to a PC or using memory card support, and operating instructions are displayed on the LCD monitor. This research produces an Arduino-based 3D printer with FFF (Fused Filament Fabrication) technology that will make it easier for users to operate a 3D printer with an LCD screen and Printing does not have to always be connected with a PC because it uses a memory card that can store files and produce better printing. This research uses the Linear Sequential Model (LSM) research method. This model is often called the "Classic Life Cycle" or waterfall model. This method consists of 5 repetitive stages namely the analysis phase of the study of literature, the stage of design / system design, the stage of hardware assembly, the coding phase, and the testing phase (Pressman, R.S, 2012).
Downloads
Download data is not yet available.
Article Details
How to Cite
Saptono, M., & Fuad, R. (2020). PROTOTYPE RANCANGAN PRINTER 3D DENGAN SMART LCD BERBASIS ARDUINO MEGA 2560 MENGGUNAKAN TEKNOLOGI FUSED FILAMENT FABRICATION. Electro Luceat, 6(1), 20-27. https://doi.org/10.32531/jelekn.v6i1.191
Section
Articles
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
References
[1] Setyoadi dkk. (2015) Perancangan dan manufaktur printer 3D tipe Fused Deposition Modelling (FDM), SNHP-5, Universitas PGRI Semarang.
[2] Dahlan,dkk (2017), Rancang bangun Printer 3D menggunakan Kontroller Arduino Mega 2560, Prosiding SNATIF ke-4, Fakultas teknik, universitas Muria Kudus.
[3] Putra & Sari (2018) Pemanfaatan Teknologi 3D dalam proses Desain Produk Gaya Hidup, SENSITEK, STMIK Pontianak.
[4] Meilanov (2018), Desain Sambungan Batang pada Mesin 3D Printing tipe Delta, Tugas Akhir, Universitas Islam Indonesia, Yogyakarta.
[5] Ismianti, Herianto (2018) Framewordk Prediksi Penggunaan 3D Printing di Indonesia pada Tahun 2030. Seminar Nasional IENACO, Universitas Gadjah Mada.
[6] Tobi, M. (2015) “RANCANG BANGUN ROBOT BERODA PEMADAM API MENGGUNAKAN ARDUINO UNO REV.1.3”, Electro Luceat, 1(1), pp. 52-61. doi: 10.32531/jelekn.v1i1.16.
[7] Tobi, M. (2018) “DESAIN SISTEM PENGONTROLAN PINTU AIR OTOMATIS BERDASARKAN LEVEL KETINGGIAN AIR PADA KALI REMU SORONG PAPUA BARAT”, Electro Luceat, 4(1), pp. 43-51. doi: 10.32531/jelekn.v4i1.101.
[8] Rumalutur, S. and ohoiwutun, john (2018) “SISTEM KENDALI OTOMATIS PANEL PENERANGAN LUAR MENGGUNAKAN TIMER THEBEN SUL 181 H DAN ARDUINO UNO R3”, Electro Luceat, 4(2), pp. 43-51. doi: 10.32531/jelekn.v4i2.143.
[9] ohoiwutun, john, Rumalutur, S. and Edy, K. (2019) “MINIATUR SISTEM KONTROLER ESKALATOR OTOMATIS MENGGUNAKAN ARDUINO”, Electro Luceat, 5(1), pp. 46-56. doi: 10.32531/jelekn.v5i1.145.
[10] Mappa, A. and Sogen, M. (2019) “DESIGN AND DEVELOPMENT OF PROTOTYPE CONTROL SYSTEM USING DISTANCE SENSORS”, Electro Luceat, 5(2), pp. 48-61. doi: 10.32531/jelekn.v5i2.153.
[2] Dahlan,dkk (2017), Rancang bangun Printer 3D menggunakan Kontroller Arduino Mega 2560, Prosiding SNATIF ke-4, Fakultas teknik, universitas Muria Kudus.
[3] Putra & Sari (2018) Pemanfaatan Teknologi 3D dalam proses Desain Produk Gaya Hidup, SENSITEK, STMIK Pontianak.
[4] Meilanov (2018), Desain Sambungan Batang pada Mesin 3D Printing tipe Delta, Tugas Akhir, Universitas Islam Indonesia, Yogyakarta.
[5] Ismianti, Herianto (2018) Framewordk Prediksi Penggunaan 3D Printing di Indonesia pada Tahun 2030. Seminar Nasional IENACO, Universitas Gadjah Mada.
[6] Tobi, M. (2015) “RANCANG BANGUN ROBOT BERODA PEMADAM API MENGGUNAKAN ARDUINO UNO REV.1.3”, Electro Luceat, 1(1), pp. 52-61. doi: 10.32531/jelekn.v1i1.16.
[7] Tobi, M. (2018) “DESAIN SISTEM PENGONTROLAN PINTU AIR OTOMATIS BERDASARKAN LEVEL KETINGGIAN AIR PADA KALI REMU SORONG PAPUA BARAT”, Electro Luceat, 4(1), pp. 43-51. doi: 10.32531/jelekn.v4i1.101.
[8] Rumalutur, S. and ohoiwutun, john (2018) “SISTEM KENDALI OTOMATIS PANEL PENERANGAN LUAR MENGGUNAKAN TIMER THEBEN SUL 181 H DAN ARDUINO UNO R3”, Electro Luceat, 4(2), pp. 43-51. doi: 10.32531/jelekn.v4i2.143.
[9] ohoiwutun, john, Rumalutur, S. and Edy, K. (2019) “MINIATUR SISTEM KONTROLER ESKALATOR OTOMATIS MENGGUNAKAN ARDUINO”, Electro Luceat, 5(1), pp. 46-56. doi: 10.32531/jelekn.v5i1.145.
[10] Mappa, A. and Sogen, M. (2019) “DESIGN AND DEVELOPMENT OF PROTOTYPE CONTROL SYSTEM USING DISTANCE SENSORS”, Electro Luceat, 5(2), pp. 48-61. doi: 10.32531/jelekn.v5i2.153.